DensaCURE is a premium nano-lithium based concrete hardener and densifier designed specifically for cementitious surfaces. Its advanced formulation allows for safe, fast, and easy application, making it the most effective densifier on the market.
By penetrating deeply into the concrete matrix, DensaCURE reacts within the pores to form insoluble calcium silicate hydrate (C-S-H), significantly enhancing surface hardness. This results in superior abrasion resistance, reduced liquid penetration, and virtually eliminates dusting. Additionally, treated surfaces require less maintenance, making DensaCURE an ideal solution for long-lasting, durable concrete protection.
Nano-Lithium Formula – Advanced nano-lithium chemistry for deep penetration and uniform reaction.
Surface Hardening – Significantly increases concrete hardness and abrasion resistance.
Dust-Proofing – Eliminates surface dusting by binding loose particles internally.
Improved Durability – Enhances long-term performance and lifespan of concrete surfaces.
Water Resistance – Reduces liquid absorption and moisture ingress.
Low Maintenance – Creates a denser, easier-to-clean surface with minimal upkeep.
Fast & Easy Application – Spray-on and ready-to-use with no rinsing or scrubbing required.
Safe to Use – Low VOC, non-toxic, and environmentally responsible.
Permanent Treatment – Reacts chemically to form a long-lasting, insoluble internal barrier.
Compatible with Polished Concrete – Ideal as a densifier in the polishing process.
DensaCURE shall be a nano-lithium based concrete hardener and densifier, specifically formulated for burnishing applications on cementitious surfaces. The product shall be applied to clean, dry, fully cured concrete prior to mechanical burnishing. Upon application, DensaCURE shall penetrate deeply into the concrete surface and react chemically to form insoluble calcium silicate hydrate (C-S-H), increasing surface density and hardness.
Following application, the concrete surface shall be burnished using a high-speed burnisher fitted with appropriate pads (minimum 1500 RPM) to enhance product absorption, drive chemical reaction, and produce a sealed, dust-proof, and aesthetically improved finish. The burnishing process shall activate the densifier and develop a polished sheen without the use of topical coatings.
DensaCURE shall be non-toxic, low VOC, and require no rinsing. Treated surfaces shall exhibit improved abrasion resistance, reduced porosity, and simplified maintenance while remaining breathable.